4 Operation4.5 Assistant element / Suction handpiece trayDentsply SironaOperating Instructions Simulation Unit Sim Intego66 66 09 437 D3649D3649.201.01.04.02 06.20194.5.5 Mini L.E.D. curing light4.5.5.1 Safety instructionsLED beamexit apertureIMPORTANT!Potentially hazardousradiation!CAUTIONThe curing light contains powerful LEDs. In accordance with IEC62471, they are classified in risk group 2 with the light bar removed.➢ Do not stare into the beam path for longer periods, as this candamage your eyes.➢ Do not observe the light aperture with optical instruments whichcan decrease the beam cross-section (e.g. magnifying lenses).➢ Do not under any circumstances stare into the beam path whenthe glass rod is removed.➢ Never aim the laser beam at the eyes of the user, even if he orshe is wearing protective goggles.➢ Never work without the glare shield.➢ Never look into the reflected light.➢ Point the light only at the treatment site.Any condensation occurring in the handpiece of the mini LED maycause impairment (e.g. fogging of the LED). When moving thehandpiece from a cool environment to a warm room, always wait for it toreach room temperature before putting it into operation.Curing lights must not be used on persons who suffer or have sufferedfrom photobiological reactions (including solar urticaria anderythropoietic porphyria). They should also not be used on personscurrently being treated with any medications that increase sensitivity tolight (including methoxsalen and chlortetracycline).Any persons who have in the past suffered from retinal or lens disordersor have undergone eye surgery, especially for cataracts, must consulttheir ophthalmologist before undergoing treatment with the mini LED.It is especially advisable to always wear appropriate protective goggles.For the frequency range of the light, see Technical data.