Eaton 5PX Advanced User's Manual

Also see for 5PX1500HRTG2: Service manual

614-40096-00 35•••1.2.3.Events are silent status information that are recorded into the Event log. Example = "AC freq in range".Alarms are recorded into the Event log and displayed on the LCD status screen with the logo blinking. Some alarmsmay be announced by a beep every 3 seconds. Example = "Battery low".Faults are announced by a continuous beep and red LED, recorded into the Fault log and displayed on the LCD with aspecific message box. Example = Out. short circuit.Use the following troubleshooting chart to determine the UPS alarm condition.7.1 Typical alarms and faultsTo check the Event log or Fault log:Press any button on the front panel display to activate the menu options.Press the down button to select Event log or Fault log.Scroll through the listed events or faults.