Eaton 9130 UPS User Manual
Also see for Powerware 9130: User guideUser guideSpecificationsUser guideInstallation guide
                                                                                                                      | |
Contents
|
INSTALLATIONEaton® 9130 UPS (700–3000 VA) User's Guide 164201718 Rev 3 www.eaton.com/powerquality28C A U T I O NA small amount of arcing may occur when connecting an EBM to the UPS. This is normal andwill not harm personnel. Insert the EBM cable into the UPS battery connector quickly andfirmly.5. Plug the EBM cable(s) into the battery connector(s) as shown inFigure 13. Up to four EBMs may be connected to the UPS.Up to 1500 VA models. Unclip the EBM connector on the UPS batterypanel and connect it to the EBM connector on the EBM. Press thetwo parts tightly together to ensure a proper connection.2000–3000 VA models. Connect red to red, black to black, and green togreen. Press the two parts tightly together to ensure a properconnection.All models. To connect a second EBM, unclip the EBM connector onthe first EBM and pull gently to extend the wiring to the EBMconnector on the second EBM. Repeat for any additional EBMs.6. Verify that the EBM connections are tight and that adequate bendradius and strain relief exist for each cable.Up to 1500 VA Models 2000–3000 VA ModelsFigure 13. Typical EBM Installation |
Related manuals for Eaton Powerware 9130
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine