Main menu Submenu FunctionsLogs Active events All active events are displayed.System log A log of all system events.Service log A detailed log of UPS operations.Change log A log of all changed settings and their values.Statistics:UPS,BatteryStatisticssummaryA summary of UPS statisticsStatistics details Details are available by pressing on different statis-tics.Settings Setting group Configurable user settings. For details, see Section7.1.4.1.7.1.4.1 User settingsThe UPS has the following settings that are user-modifiable. In the Homescreen, select Settings.Table 22: User settingsSetting DescriptionInfo Information on the UPS model, including part numberand serial number.About Version information.GSM GSM Modem.Call Service Send automatic e-mail to service center in case of a fail-ure.To modify the Configuration settings, you need to sign in.Table 23: Configuration settingsSetting DescriptionLanguage Change the user interface language.Unit Name Change the unit name.Clock Change the date and time, change the clock format orenable/disable NTP clock setup.Signal Inputs Select signal input name and function.Relay Outputs Configure the relay outputs.Battery Test Change the power level and duration for battery test.Bypass Limits Change bypass voltage, bypass frequency or bypassslew rate limits.Screen Saver Timeout Change the screen saver timeout.Meters Change the meters format.Lamp Test Enable the lamp test.Eaton 9PHD UPS 30–200 kW User's and installation guide© Eaton Corporation plc 2017. All rights reserved. Document ID: P-164000531 94 (127)
