Eaton COOPER POWER Series Installation And Operation Instructions Manual

Also see for COOPER POWER SERIES: Installation and operation instructions Installation instructions Installation instructions Installation and operation instructions Operation instructions

Eaton COOPER POWER Series Installation And Operation Instructions Manual Manual pdf 40 page image

36 OPERATION AND INSTALLATION INSTRUCTIONS MN280075EN July 2018Form 6 microprocessor-based rack-mount recloser control5. Align the filler plate over the handle holes.6. Attach the handle (Item 3) and filler plate (Item 2) tothe control using five #10-32 Pan Head Screws (Item 5)(Figure 31).7. Tighten all hardware completely. Do not torque.TRIP CLOSELeft Side View Front ViewTop View1 13334443512Control Filler PlateHandle5Figure 31 Form 6 double rack – single mount recloser controlCommunication board accessoriesThe Form 6 control is equipped with a CommunicationBoard Accessory (expansion bay) offering versatilesupport for modern communication media. Six distinctcommunication options (Figure 32) are available, providingtwo-way, real time digital communications with a remoteterminal unit (RTU), wireless, telephone modem, Ethernetnetwork, or other communication devices. The followingoptions are available:●● No auxiliary communication card installed (standard)●● RS485 (isolated) Serial communication card●● Fiber-optic-based Serial Communication Card (ST)●● 10/100 Base-T dual Ethernet communication card(2*RJ-45)●● 100 Base-FX dual Ethernet communication card(2*MT-RJ)●● 10/100 Base-T, 100 Base-FX Ethernet communication card(RJ-45 + MT-RJ)The expansion bay based Communication BoardAccessory concept offers high versatility with respect tocommunication medium and protocol support. Additionalaccessories are being continuously developed. Contact yourEaton representative for the latest information regardingparticular media and communication protocol support.