Eaton Cooper Power Series Installation, Operation And Maintenance Manual

Also see for COOPER POWER SERIES: Installation and operation instructions Installation instructions Installation instructions Installation and operation instructions Operation instructions

Contents

Eaton Cooper Power Series Installation, Operation And Maintenance Manual Manual pdf 126 page image

This section covers Alarm displays; for more information onprogramming alarms, see the Alarms section of documentMN225015EN CL-7 Regulator Control ProView NXGSoftware Programming Guide.If there are no unacknowledged active alarms available, theLCD displays the following message:No UnacknowledgedActive AlarmsIf there are no acknowledged active alarms available, theLCD displays the following message:No AcknowledgedActive AlarmsAn actual alarm display example:Supervisory StateActive01/25/2013 11:35:58a(MORE...)Status and data alarmsFor a complete list and descriptions of the available Statusand Data Alarms section of document MN225015EN CL-7Regulator Control ProView NXG Software ProgrammingGuide.Instantaneous metering and counter quantitiesFor most Instantaneous Metering quantities, there are twodata alarms available: One that can be triggered for a highthreshold value and one that can be triggered for a lowthreshold value. For counter quantities, there will be onlyone data alarm that will be triggered for a high threshold.Maintenance quantitiesSee Section 7: Advanced Control Features: Duty cyclemonitor for more information on these alarms.• Contact Life Level 1 Exceeded• Contact Life Level 2 ExceededSequence of events (SOE)Use the Sequence of Events menu item to access a listof events. No security code is needed to display events; asecurity code is needed to acknowledge an event.This section covers displaying the SOE; for moreinformation on programming SOE and a complete list ofavailable events, see the Sequence of Events section ofdocument MN225015EN CL-7 Regulator Control ProViewNXG Software Programming Guide.The event labels can use 2 LCD lines for a total of up to 40characters.If there are no events available, the LCD displays thefollowing message:There Are No Events.An SOE example:VR1 Control SwitchAuto/Remote01/25/2013 11:35:58a(MORE...)When accessed through the keypad, only the last 50 eventswill be displayed. If there are many events (100+) thathave not been read via the front panel, it may take a fewseconds. While this is occurring the following message,indicating that events are being read, may appear beforedisplaying the latest events:Events...120INSTALLATION, OPERATION, AND MAINTENANCE INSTRUCTIONS MN225003EN April 2018CL-7 Voltage Regulator Control