Eaton DF6000 Application Manual

Also see for DF6000: Application guide Installation and operation manual

63 Amended: Jan 2014Program UpdatesLoop DriverLoop Driver software can be updated using a Cyclone Pro programming device; alternatively toupdate the software the loop driver will need replacing.DisplayThe display program can be updated using a utility program called Panel Prog or via the Site Installerprogram. This can only be carried out in this manner on the latest display software releases (Aug 08).Alternatively to update earlier versions of software the display micro will need replacing.NOTE In all instances a download of the program will be required prior to any upgradeThe display program can be updated using the Panel Prog program and Hyperlink as follows;1. Connect Laptop to the panel via the serial port.2. Open HyperTerminal program and apply a name in the new connection box. Click OK3. Select Com 1 in the ‘connect to’ box. Click OK4. In the Comm 1 properties box set - 38400 baud, data bits 8, parity none, stop bits 1 and noflow control.5. Data will now start scrolling down the screen area.FIG 556. In HyperTerminal, press ctrl-x, and then 'y' immediately. This will erase the current program inthe display micro.7. Wait until the text "WAITING FOR PROGRAM" appears in HyperTerminal window.8. Close HyperTerminal.9. Run PanelProg.exe, and ensure the correct serial port is selected. (It normally defaults tocomm. 3)