Eaton FX6100 Installation And Operation Manual

8 INSTALLATION AND OPERATION MANUAL 25-16329-B December 2019 www.eaton.comSection 1: System installation and designSection 1: System installation and designIntroductionThe Panel provides all of the sophisticated features required of a leading edgeanalogue addressable fire system along with the simple operation and neatinstallation demanded by installers and building usersThe panel can be flush or surface mounted and the generously sized metal back boxallows ample facilities for rear or top cable entriesThe panels are available in either Single or Two Loop ConfigurationA loop connected and a network connected repeater panel is available (seeequipment listing page 10)A comprehensive range of ancillary devices is available to operate with the Panel,including Optical, photo-thermal and heat detectors, base mounted and stand alonesounders (including an IP67 version) a loop powered beacon and a wide range ofinput and output interfacesEach of the Panel system components has been specifically designed to operate aspart of a Panel system, this provides an assurance that the panel, the detectors, theinterfaces and the ancillaries are all fully compatible with each other and that the fullrange of system functionality is supported by each deviceProject planningThe following is a typical program and timetable for a Panel installation project, oncethe initial order has been received:1 Project meetingInstaller and user to be present; system specifications, schematic diagram andproposed circuit drawing to be available Panel Installation & Commissioning Guide tobe provided2 Equipment fixTypically 2 week’s notice is required for equipment to be delivered Cable to beinstalled and bases/back boxes to be fitted Then fire detectors, call points, alarmsounders, isolator units and interface units to be installed3 Address scheduleSchedule of sensor locations to be completed by installer and returned to enableSystem programming4 Auto learnFire panel/repeater panels to be installed and terminated System to be powered upby installer and auto learn mode activated (see Auto Learn section) System to betested and verified by installer, prior to final commissioning