Eaton FX6100 Installation And Operation Manual

88 INSTALLATION AND OPERATION MANUAL 25-16329-B December 2019 www.eaton.comSection 4: AppendixBase Sounder VAD (CASBB394)Installation1 Installation is simple using first fix base2 First fix base is fixed to mounting surface via 2 fixings holes3 Cables enter through aperture in base (rear entry only)4 Main body is then clipped into place on base, main body locks into place whenpressed into position5 Cables pass through aperture in sounder body and terminate at the front6 Connections are to connector block on front of main sounder bodySystem functionality1 Volume and tone are set by control panel, no need to accesssounder to alter setting2 Soft addressedStandard connectionsote:N Base terminal 1, 2, 3 and 4 not used All wiring terminates as shown aboveWARNINGDo NOT use high voltage testers if ANY equipmentis connected to the system Earth screen must becontinuous along entire length of loop2413ELED+ - + -2413ELED+ - + -CompatibleIntelligent AddressableControl PanelLoop finish Loop startS+S-F+F-