Eaton Green Motion DC 44/66 Installation Manual
                                            |
28 GREEN MOTION DC 44/66 EV CHARGER INSTALLATION MANUAL MN192006EN March 2023 www.eaton.com00 TitleStep 2. Ensure the laptop is below the same subnet of the RUTX09 modem/router. The default IP address of therouter is 192.168.52.1. Contact your Eaton service representative for further details for the router credentialsusing the email address bgtechsupport@eaton.comStep 3. Connect to the modem/router. If a step-by-step configuration menu “Setup Wizard” appears, ignore it and godirectly to the menus described below.Step 4. Go to the Network> WAN menu.Step 5. Activate and edit the MOB1S1A1 network. If necessary, enter the APN and the PIN code of the SIM card.Step 6. Press Save & Apply.Step 7. Insert the SIM card in the SIM card slot on the modem/router.7.2.3 Closing the front cover after configuring the EV chargerWARNING – failure to close and secure the front door after configuring the EV charger presents arisk of electric shock.Please refer to the Chapter 8.1 of this manual on how to properly close and secure the housing of the EV charger.Figure 21. Teltonika RUTX09 modem/routerTag Description1 WAN Ethernet port2 LAN Ethernet ports3 SIM card slot123Always make sure the EV charger is on standby mode before inserting or removing the SIM card.Follow the steps below to configure the modem/router of the unit for connection via SIM card:Step 1. Connect your laptop with one of the LAN ports of the router via an ethernet cable. See Figure 21. |
Related manuals for Eaton Green Motion DC 44/66
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine