Eaton Green Motion DC 44/66 Installation Manual
                                            |
33GREEN MOTION DC 44/66 EV CHARGER INSTALLATION MANUAL MN192006EN March 2023 www.eaton.com00Title8. MaintenanceInstallation, commissioning, maintenance or retrofitting of the EV charger must be performed by professionaland qualified personnel who are responsible for complying with existing standards and local installationregulations.Before starting connection operations, make sure that the external AC-line main switch is disconnected, andcircuit breakers are open.Any operation that requires to open the EV charger can lead to electric shock hazards.In case the unit shows a failure and the emergency stop button is pushed, check the integrity of the unit,cables and connectors before starting the maintenance process.Opening the EV charger, as well as performing any configuration changes, must be performed by a qualifiedelectrician in accordance with local safety and electrical regulations and laws.8.1 How to open/close the housing of the Green Motion DC 44/66 EV charger and wirethe displayWhen removing the front cover, be careful not to damage any cables connected to the display and theelectronic boards.Before attempting to open the EV charger, ensure the external AC-line main switch is opened, and circuitbreakers are open.Follow these steps to open the housing of the EV charger.Step 1. Using the square key 8 mm, unlock the three cam locks located on the right side of the EV charger(see Figure 23).Disconnect the unit from the power supply and wait at least 10 minutes to allow its components to cooldown and any static electricity storage devices to discharge, before carrying out any maintenance on theunit. The housing could overheat during its operation or be heated by direct sunlight, so that it can causeburns by contact. To avoid injuries by heat, please use suitable PPE or wait for the equipment to cool downbefore accessing it.Wait at least 10 minutes after disconnecting the unit from the power supply to allow its components to cooldown and any static electricity storage devices to discharge, before operating on the unit. |
Related manuals for Eaton Green Motion DC 44/66
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine