Eaton Hydrowa Instruction Manual

Instruction ManualPage 53 Precaution3.1 Instructions before operatingBefore installing, handling, removing or starting to work with acylinder read this manual first. Make sure the appropriate personalprotection equipment is used at all time. Only qualified personnelshould be allowed to operate a cylinder.Eaton Industries is not responsible for damaged property, injuries or any otherkind of damage occurred during the use of cylinders by third parties.3.2 ConditionsMake sure the cylinders are used in the environmental conditions that aresuitable for the cylinders. Eaton industries will not guarantee that cylinders willproperly function in different conditions then they are made for. Also the lifetimeof the cylinder will be decreased when it is used in different environmentalconditions.3.3 Safety aspects hydraulic systemCylinders connected to a hydraulic system must comply with NEN-EN-ISO 4413and NEN-EN 982. The system must take safety aspects into account.3.4 WarningsNever expose cylinders or cylinder components to any kind of openfire!Do not expose the cylinder or cylinder components to atemperature above 70°C unless you have approval of EatonIndustries BV to use the cylinder in environmental conditions withtemperatures above 70°CSome hydraulic oil types contain corrosive substances!Do not drill any holes in the cylinders!Do not weld anything on cylinders. If some extra mounting spot oranything else has to be welded on the cylinder contact Eatonindustries at Eindhoven.Warning signs that might be attached to the cylinder (when applicable):