Eaton Power Xpert Gateway Series 1000 Card User Manual

Also see for POW-R-COMMAND 1000: Instructions for the Use, Operation and Maintenance Instructions for the Use, Operation and Maintenance Quick start guide Installation and user manual Installation and user manual

Contents

CONFIGURING THE CARDEATON Power Xpert® Gateway Series 1000 Card User’s Guide S 164201670 Rev 1224. To customize how the date appears in the card’s data and eventlogs, select a Date format for logs option (mm/dd/yyyy, dd/mm/yyyy,yyyy-mm-dd, or dd mmm yyyy). The default is mm/dd/yyyy.5. To select the time zone for the card, specify the Timezone for Logs,email, and connected device.6. Click Apply and then OK to save the settings.Configuring SNMP OptionsThis section describes the following SNMP configuration options:S Configuring community strings and trap recipientsS Restricting SNMP accessS Setting system location and system contactS Managing from an SNMP NMSCommunity Strings and Trap RecipientsThe default community strings are “public” for read-only, “private” forread-write, and “public” for receiving traps.The PXGX Series 1000 Card supports several event-related traps thatcan be reported to the SNMP network management software. SeeChapter 4, “MIB Files,” on page 45 for more information.To configure the SNMP options:1. From the card’s Web page, click the SNMP link from the menu bar.2. To change the community strings, type a new community string inthe appropriate field.3. Click Add to add a new trap recipient entry to the list. AnIP/hostname field appears. Enter the IP address or host name forthe trap recipient.NOTE When using host names, verify that the IP address of your network DNS Server isconfigured (see “Network Configuration” on page 16).