Eaton Power Xpert Gateway Series 1000 Card User Manual

Also see for POW-R-COMMAND 1000: Instructions for the Use, Operation and Maintenance Instructions for the Use, Operation and Maintenance Quick start guide Installation and user manual Installation and user manual

Contents

GETTING STARTEDEATON Power Xpert® Gateway Series 1000 Card User’s Guide S 164201670 Rev 122. Provide your local network administrator with the card’s MACaddress:- MAC Address Port 1 _________________________- MAC Address Port 2 _________________________The MAC address for Port 1 is located on a label on top of the card.To determine the MAC address of Port 2, increase the Port 1address by one. For example: 0060261089A8 (Port 1),0060261089A9 (Port 2).3. Contact the local network administrator for the following networksettings:- IP Address Port 1 (static address*) _________________________- IP Address Port 2 (static address*) _________________________- Gateway Address _________________________- Subnet Mask _________________________- DNS (name server) IP Address** _________________________* The PXGX Series 1000 Card provides two network connections(Port 1 and Port 2), each accessed with separate IP addresses. Ifyou are setting up the PXGX Series 1000 Card in a dynamic hostconfiguration protocol (DHCP) environment (default), the networkadministrator must set up the DHCP server to provide a staticaddress each time the card makes a DHCP request. Use Port 2 onlyif you need a redundant connection using a separate subnet.** Obtain the Domain Name Server (DNS) IP address if you plan touse host names.4. If you need e-mail functionality, obtain the SMTP IP address or hostname. If using the SMTP host name, verify that you also have theDNS IP address (see Step 3).- SMTP (mail server) IP Address orHost Name _________________________