Eaton Powerware Series User Manual

Also see for Powerware Series: Installation and operation manual User guide User guide User guide User guide

EATON Power Distribution Rack (208V) User’s Guide 164201720 Rev 1 www.powerware.com 43Chapter 6 SpecificationsThis chapter provides product specifications and configuration schematics.Product SpecificationsThis section provides the following specifications for the PDR: Weights and dimensions Electrical input and output Meter Environmental and safety Transient Voltage Surge Suppression / Surge Protective Device (TVSS/SPD)Table 9. Weights and DimensionsDimensions (WxDxH) 597 x 965 x 1994 mm (23.5" x 38" x 78.5")Weight One Side: 200 kg (450 lb)Two Sides: 315 kg (700 lb)NOTE Weights are approximate. Weight varies depending on installed options.Maximum Distributed Weight 1225 kg/sq m (250 lb/sq ft)Table 10. Electrical InputNominal Input Voltage 208/120 Vac three−phase, 3 wire + N + GNominal Input Frequency 50 or 60 HzInput Frequency Range 45–65 HzInput Ratings Up to 1280A depending on configurationConnections Direct connection to panelboard circuit breakers (quad−feed)Main incoming lugsMain breakersNOTE Power terminals provide connection of a 173% rated neutral and a parity−sized insulated ground.Input Power Factor Load dependentInput Current THD Load dependentTable 11. Electrical OutputNominal Output Voltage 208/120 Vac three−phase, 3 wire + N + GNominal Output Frequency 50 or 60 HzOutput Frequency Range 45–65 Hz