Eaton Powerware Series User Manual

Also see for Powerware Series: Installation and operation manual User guide User guide User guide User guide

EATON Power Distribution Rack (208V) User’s Guide 164201720 Rev 1 www.powerware.com 1Chapter 1 IntroductionThe Eaton® Power Distribution Rack (PDR), part of the Powerware® series, is designedto provide increased distribution capacity in a standard data center enclosure that canbe placed anywhere within or at the end of the aisle, depending on configuration.Providing outstanding performance and reliability, the PDR’s unique benefits includethe following: 208/120V, 50 Hz or 60 Hz three−phase power distribution unit, with one to fourpanelboards, delivering up to 168 branch breakers Single−feed or dual−feed voltage sources (400A, 600A, 800A) Standard top and bottom cable entry in a free−standing structure Easy installation and servicing with front and rear access, spacious wireways, andremovable side panels, exterior doors, and interior barriers Conduit entry plates with plugged holes instead of knockouts Display viewable through the front exterior door for ease of use Lockable exterior doors and secure interior barriers accessible only by tool Firmware that is field upgradeable Separate isolated neutral busbar for each panelboard to connect the output cableneutral conductor, in addition to a separate ground busbar that may be configuredfor an isolated ground system Energy Management System (EMS) monitoring with single or dual displays.EMS provides two levels of configuration and metering: System Level Monitoringand Branch Circuit Monitoring System (BCMS). With BCMS, you can see thecurrent values of each of the distribution branch breakers, letting you measure,plan, and manage power with greater precision.EMS also provides communication options such as network connectivity. ThePower Xpert® Gateway Card installed in the X−Slot® communication bay providesremote monitoring through a Web browser interface, e−mail, and a networkmanagment system using SNMP; connects to a twisted−pair Ethernet(10/100BaseT) network. Modbus® TCP support provides direct integration of thePDR’s parameters to a Building Management System (BMS). It has a built−inswitching hub that allows one additional network device to be connected to thenetwork without the requirement of an additional network drop.NOTE LAN drops for use with the X−Slot card must be provided by the customer.