97InStALLAtIon And opErAtIon mAnuAL 25-13741-E January 2020 www.eaton.com18. Webserver18. WebserverVoCALL 16 provides an ethernet based application to aid in configuration of installedsystem. Webserver can be used to configure the system after completing stepsmentioned up-to and including section 11.418.1 Connect to WebserverWebserver is configured to work with Static IP address on a peer to peer connectionbetween PC and MX16 panel.Settings required on PC/Laptop – for Windows 10 PC1. Go to Network and Internet settings.2. Go to Ethernet -> Change adapter options.3. Left click on Ethernet and click on properties.4. Select Internet Protocol Version 4 (TCP/IPv4). Click on properties.5. Input below values in the settings. Click ok.a. IP address: 192.168.1.2b. Subnet mask: 255.255.255.0c. Default gateway: 192.168.1.1