5–4 869 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUALSUMMARY CHAPTER 5: STATUSFigure 5-4: Tab pushbutton summary (left) and detailed view (right)Only the tab pushbuttons that are not set to Disabled are shown in color; labels for the tabpushbuttons are shown for both active and disabled pushbuttons if labels have beenconfigured. (Configure tab pushbuttons from Device > Front Panel > Tab PBs > Tab PB1(X).)When the actual button is pressed, the button on the screen is highlighted in blue and thePB [X] PRESS operand becomes active. Although a disabled pushbutton can be pressed, noaction is taken and its operands are not activated. Pressing ESCAPE returns the screen toTab Pushbutton summary page. The Short Text for each Tab Pushbutton is used on theSummary Page.Pressing >> shows the next set of tab pushbuttons. For example, when in the page withpushbuttons 1 to 4, pressing >> will navigate to the screen with pushbuttons 5 to 8. Bypressing >>, the user can cycle through all five pushbutton screens. To go from page 2 topage 1, one must press >> 4 times to cycle through and navigate to page 1 withpushbuttons 1 to 4. Alternatively, one can escape to the overall summary screen andnavigate to any desired page of pushbuttons.