5–16 869 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUALINFORMATION CHAPTER 5: STATUSFigure 5-7: Information for Hordware Versions• FPGA Firmware Version: The firmware version of the FPGA• IO F CPLD: The version of the CPLD in IO slot F• IO G CPLD: The version of the CPLD in IO slot G• AN J CPLD: The version of the CPLD in analog slot J• AN K CPLD: The version of the CPLD in analog slot K• Display CPLD: The version of the CPLD of the displayEnvironmentThe Information related to Environmental is displayed here.Path: Status > Information > Environment• Instantaneous Temperature: The most recent temperature measurement taken bythe EAM.• Firmware Version: The software version of the EAM module found in the relay.• Last Poll Date/ Time: The date and time on which the last measurements wererecorded in the format MM/DD/YY and HH/MM/SS.• Average Humidity: The average of all the humidity measurements taken over time(last 1 hr) by the EAM.• Maximum Humidity: The maximum humidity measurement taken by the EAM since itbegan recording data.• Minimum Humidity: The minimum humidity measurement taken by the EAM since itbegan recording data.• Average Ambient Temp: The average of all the instantaneous temperaturemeasurements taken over time (last 1 hr) by the EAM.• Maximum Ambient Temp: The maximum temperature taken by the EAM since itbegan recording data.• Minimum Ambient Temp: The minimum temperature taken by the EAM since it beganrecording data.• Humidity (e.g. <30%): The accumulated amount of time (hrs) that the humiditymeasured by the EAM stayed in the range specified.• Temp (e.g. <=-20°C): The accumulated amount of time (hrs) that the temperaturemeasured by the EAM stayed in the range specified.• Temp and Humidity (e.g. >40°C and <55%): The accumulated amount of time (hrs)that the temperature and humidity measured by the EAM stayed in the rangesspecified.• Surge Count: The number of surge (>500 V/1.2/50 μS) events that have occurred sincethe EAM started recording data.