CHAPTER 5: SETTINGS PRODUCT SETUPB90 LOW IMPEDANCE BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL 5-915File transfer by IEC 61850The B90 supports file transfer by IEC 61850. The approach is as follows, using the SISCO AX-S4 61850 client software as anexample.1. In the AX-S4 61850 Explorer window, click the Tools menu and access the SISCO File Transfer Utility.2. Select the Remote AR Name from the drop-down list. Available files appear in the File Specification area on the rightside of the window.3. With the Copy option active, select a file to transfer and click the Go button. The file is copied and displays in the Locallist on the left side of the window.4. Repeat the process to transfer any other files.Figure 5-44: File transfer by IEC 618505.3.6.13 Web server HTTP protocolSETTINGS PRODUCT SETUP COMMUNICATIONS WEB SERVER HTTP PROTOCOLThe B90 contains an embedded web server and can display pages in a web browser. The web pages are organized as aseries of menus that can be accessed starting at the B90 “Main Menu.” Web pages are read-only and are availableshowing DNP and IEC 60870-5-104 points lists, Modbus registers, event records, fault reports, and so on. First connect theB90 and a computer to an Ethernet network, then enter the IP address of the B90 Ethernet port in a web browser.To close the port, set the port number to 0.Any change takes effect when the B90 is restarted. WEB SERVER HTTP PROTOCOL HTTP TCP PORTNUMBER(80): 80Range: 0 to 65535 in steps of 1
