CHAPTER 3: INSTALLATION ADD DEVICE TO SOFTWAREC60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL 3-553Windows IP ConfigurationEthernet adapter :Connection-specific DNS suffix. . :IP Address. . . . . . . . . . . . : 0.0.0.0Subnet Mask . . . . . . . . . . . : 0.0.0.0Default Gateway . . . . . . . . . :Ethernet adapter Local Area Connection:Connection-specific DNS suffix . :IP Address. . . . . . . . . . . . : 1.1.1.2Subnet Mask . . . . . . . . . . . : 255.0.0.0Default Gateway . . . . . . . . . :C:\WINNT>Before using the Quick Connect feature through the Ethernet port, disable any configured proxy settings in InternetExplorer.1. Start the Internet Explorer software.2. Select the Tools > Internet Options menu item and click the Connections tab.3. Click on the LAN Settings button to open the following window.4. Ensure that the “Use a proxy server for your LAN” box is not checked.If this computer is used to connect to the Internet, re-enable any proxy server settings after the computer has beendisconnected from the C60 relay.1. Start the Internet Explorer software.2. Select the UR device from the EnerVista Launchpad to start EnerVista UR Setup.
