CHAPTER 6: ACTUAL VALUES RECORDSC60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL 6-276The NEWEST SAMPLE TIME represents the time the most recent samples were taken. It counts up at the defined samplingrate. If the data logger channels are defined, then both values are static.See the COMMANDS CLEAR RECORDS menu for clearing data logger records.6.5.5 Phasor Measurement Unit recordsACTUAL VALUES RECORDS PMU RECORDSThe number of triggers applicable to the Phasor Measurement Unit recorder is indicated by the NUMBER OF TRIGGERS value.The status of the phasor measurement unit recorder is indicated as follows.ACTUAL VALUES RECORDS PMU RECORDS PMU 1(2) RECORDING6.5.6 Breaker maintenanceACTUAL VALUES RECORDS MAINTENANCE BREAKER 1(4) PMU RECORDS NUMBER OF TRIGGERS:0Range: 0 to 65535 in steps of 1 PMU 1 RECORDINGSee below PMU 1 RECORDING PMU 1 FORCE TRIGGER:YesRange: No, Yes PUM 1 AVAILABLERECORDS: 0Range: 0 to 65535 in steps of 1 PUM 1 SECONDSPER RECORD: 0.0Range: 0 to 6553.5 in steps of 0.1 PUM 1 LAST CLEARED:2013/07/14 15:40:16Range: YYYY/MM/DD HH:MM:SS BREAKER 1 BKR 1 ACC ARCING AMPφA: 0.00 kA2-cyc BKR 1 ACC ARCING AMPφB: 0.00 kA2-cyc BKR 1 ACC ARCING AMPφC: 0.00 kA2-cyc BKR 1 OPERATING TIMEφA: 0 ms BKR 1 OPERATING TIMEφB: 0 ms BKR 1 OPERATING TIMEφC: 0 ms BKR 1 OPERATINGTIME: 0 ms BKR 1 ARCING AMP φA:0.00 kA2-cyc BKR 1 ARCING AMP φB:0.00 kA2-cyc BKR 1 ARCING AMP φC:0.00 kA2-cyc BKR 1 AMP MAX φA:0.00 kA
