| 
C-2 C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUALCOMMAND LINE INTERFACE APPENDIX C: COMMAND LINE INTERFACEC• All commands have a return code of 0-255. 0 indicates success and 1-255 indicate different errors• If SetupCLI is automated (in a batch file), make sure that only a single batch is running at a time. SetupCLI does notsupport concurrent operations.To run the command line interface:1. In Windows, click the Start button, enter cmd, and press the Enter key. After prompting for permission, the Windowscommand window opens.2. Enter SetupCLI followed by the action to execute. An example of use is to enter "SetupCLI -h" to display help,specifically the commands and explanations outlined here.Figure C-1: Command line interface run in the command windowSetupCLI -hDisplay help.It displays the content outline here.SetupCLI start [-c] [-s]Launch application with name .To start in client mode, which is the graphical user interface, include option '-c'. Before use, the software must be idlewithout any windows open. Any activity or open windows can cause unexpected behavior. When in client mode, do notuse Launchpad's Site Management feature.To suppress errors, include option -s.Example: SetupCLI URPC start -cSetupCLI exit [-s]Exit application with name .Example: SetupCLI URPC exitSetupCLI login -d [-A ] [-a ] -w [-s]Authenticate with device using password .For non-CyberSentry devices — Set to "traditional". Note that defaults to"traditional" if not specified. Set to "COMMANDS" or "SETTINGS". If not specified, the SETTINGS account isused.Example: SetupCLI URPC login -d "C30 Melbourne" -A traditional -a SETTINGS -w 1password1 |
