GE Feeder Management Relay 750 Instruction Manual
                                                                                                                                                                                                                                                                                                                                                          |
GE Multilin 750/760 Feeder Management Relay 5-1335 SETPOINTS 5.9 S8 TESTING5c) PREFAULT VALUESPATH: SETPOINTS ÖØ S8 TESTING ÖØ SIMULATION ÖØ PREFAULT VALUESFor proper simulation, values entered here should be below the minimum trip setting of any protection feature. The relaywill use these values when in the Prefault State. For delta or wye systems, the relay automatically sets the voltages to thesetpoint value of VT nominal secondary voltage, with balanced voltage phase positions.d) FAULT VALUESPATH: SETPOINTS ÖØ S8 TESTING ÖØ SIMULATION ÖØ FAULT VALUES PREFAULT VALUES [ENTER] for morePHASE A/B/C CURRENTLEVEL: 0.50 x CTRange: 0.00 to 20.00 x CT in steps of 0.01PWR FACTOR ANGLE:0° LagRange: 0 to 359° Lag in steps of 1 FAULT VALUES [ENTER] for morePHASE A-N VOLTAGELEVEL: 1.00 x VTRange: 0.00 to 2.00 x VT in steps of 0.01PHASE A-N VOLTAGEPOSITION: 0° LagRange: 0 to 359° Lag in steps of 1PHASE B-N VOLTAGELEVEL: 1.00 x VTRange: 0.00 to 2.00 x VT in steps of 0.01PHASE B-N VOLTAGEPOSITION: 120° LagRange: 0 to 359° Lag in steps of 1PHASE C-N VOLTAGELEVEL: 1.00 x VTRange: 0.00 to 2.00 x VT in steps of 0.01PHASE C-N VOLTAGEPOSITION: 240° LagRange: 0 to 359° Lag in steps of 1PHASE A CURRENTLEVEL: 1.00 x CTRange: 0.00 to 20.00 x CT in steps of 0.01PHASE A CURRENTPOSITION: 60° LagRange: 0 to 359° Lag in steps of 1PHASE B CURRENTLEVEL: 1.00 x CTRange: 0.00 to 20.00 x CT in steps of 0.01PHASE B CURRENTPOSITION: 180° LagRange: 0 to 359° Lag in steps of 1PHASE C CURRENTLEVEL: 1.00 x CTRange: 0.00 to 20.00 x CT in steps of 0.01PHASE C CURRENTPOSITION: 300° LagRange: 0 to 359° Lag in steps of 1GND CURRENTLEVEL: 0.00 x CTRange: 0.00 to 20.00 x CT in steps of 0.01GND CURRENTPOSITION: 0° LagRange: 0 to 359° Lag in steps of 1POLARIZING CURRENTLEVEL: 1.00 x CTRange: 0.00 to 20.00 x CT in steps of 0.01POLARIZING CURRENTPOSITION: 0° LagRange: 0 to 359° Lag in steps of 1ENTERESCAPEð ðMESSAGEESCAPEENTERESCAPEð ðMESSAGEESCAPEMESSAGEESCAPEMESSAGEESCAPEMESSAGEESCAPEMESSAGEESCAPEMESSAGEESCAPEMESSAGEESCAPEMESSAGEESCAPEMESSAGEESCAPEMESSAGEESCAPEMESSAGEESCAPEMESSAGEESCAPEMESSAGEESCAPEMESSAGEESCAPEMESSAGEESCAPE |
Related manuals for GE Feeder Management Relay 750
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine