GE JCBP79 Owner's Manual And Installation Instructions

Problem Possible Causes What To DoClock and timer Plug on range is not completely • Make sure electrical plug is plugged into a live, properlydo not work inserted in the electrical outlet. grounded outlet.A fuse in your home • Replace the fuse or reset the circuit breaker.may be blown or thecircuit breaker tripped.Oven controls improperly set. • See the Using the clock and timer section.Oven will not self-clean The oven temperature is • Allow the range to cool and reset the controls.too high to set a self-cleanoperation.Oven controls improperly set. • See the Using the self-cleaning oven section.The probe is plugged into • Remove the probe from the oven.the outlet in the oven.(on some models)“Crackling” or This is the sound of the • This is normal.“popping” sound metal heating and coolingduring both the cooking andcleaning functions.Excessive smoking Excessive soil. • Touch the OFF pad. Open the windows toduring a clean cycle rid the room of smoke. Wait until the LOCKED lightgoes off. Wipe up the excess soil and reset thecleancycle.Oven door will not Oven too hot. • Allow the oven to cool below locking temperature.open after a clean cycleOven not clean after a Oven controls not properly set. • See the Using the self-cleaning oven section.clean cycle Oven was heavily soiled. • Clean up heavy spillovers before starting the cleancycle. Heavily soiled ovens may need to self-cleanagain or for a longer period of time.“LOCK DOOR” flashes The self-clean cycle has been • Close the oven door.in the display selected but the door is notclosed.“LOCKED” light is The oven door is locked • Touch the OFF pad. Allow the oven to cool.on when you want because the temperatureto cook inside the oven has notdropped below thelocking temperature.“F—and a number You have a function error code. • Touch the OFF pad. Try reactivating the controls.in the display If the function code repeats. • Disconnect all power to the range for at least30 seconds and then reconnect power. If thefunction error code repeats, call for service.Loc On appears in the The oven controls have • See the Oven lockout section to unlock.oven display been locked.Control signals after You forgot to enter a • Touch the BAKE pad and desired temperature orentering cooking time bake temperature or the CLEAN pad and desired clean time.or start time cleaning time.www.GEAppliances.ca41Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support