GE Multilin L90 Line Current Differential System 1-131 GETTING STARTED 1.3 ENERVISTA UR SETUP SOFTWARE1Before using the Quick Connect feature through the Ethernet port, it is necessary to disable any configured proxy settingsin Internet Explorer.1. Start the Internet Explorer software.2. Select the Tools > Internet Options menu item and click on Connections tab.3. Click on the LAN Settings button to open the following window.4. Ensure that the “Use a proxy server for your LAN” box is not checked.If this computer is used to connect to the Internet, re-enable any proxy server settings after the laptop has been discon-nected from the L90 relay.1. Verify that the latest version of the EnerVista UR Setup software is installed (available from the GE enerVista CD oronline from http://www.GEmultilin.com). See the Software Installation section for installation details.2. Start the Internet Explorer software.3. Select the “UR” device from the EnerVista Launchpad to start EnerVista UR Setup.4. Click the Quick Connect button to open the Quick Connect dialog box.5. Select the Ethernet interface and enter the IP address assigned to the L90, then click Connect.6. The EnerVista UR Setup software will create a site named “Quick Connect” with a corresponding device also named“Quick Connect” and display them on the upper-left corner of the screen. Expand the sections to view data directlyfrom the L90 device.Each time the EnerVista UR Setup software is initialized, click the Quick Connect button to establish direct communica-tions to the L90. This ensures that configuration of the EnerVista UR Setup software matches the L90 model number.When direct communications with the L90 via Ethernet is complete, make the following changes:1. From the Windows desktop, right-click the My Network Places icon and select Properties to open the network con-nections window.2. Right-click the Local Area Connection icon and select the Properties item.3. Select the Internet Protocol (TCP/IP) item from the list provided and click the Properties button.
