8-16 L90 Line Current Differential System GE Multilin8.3 ENERVISTA SECURITY MANAGEMENT SYSTEM 8 SECURITY83. Select the user access rights by checking one or more of the fields shown.The access rights are described in the following table4. Click OK to add the new user to the security management system.8.3.4 MODIFYING USER PRIVILEGESThe following pre-requisites are required to modify user privileges in the EnerVista security management system.• The user modifying the privileges must have administrator rights.• The EnerVista security management system must be enabled.The following procedure describes how to modify user privileges.1. Select the Security > User Management menu item to open the user management configuration window.2. Locate the username in the User field.Table 8–1: ACCESS RIGHTS SUMMARYFIELD DESCRIPTIONDelete Entry Checking this box will delete the user when exiting the user management configuration window.Actual Values Checking this box allows the user to read actual values.Settings Checking this box allows the user to read setting values.Commands Checking this box allows the user to execute commands.Event Recorder Checking this box allows the user to use the digital fault recorder.FlexLogic Checking this box allows the user to read FlexLogic™ values.Update Info Checking this box allows the user to write to any function to which they have read privileges. When any ofthe Settings, Event Recorder, and FlexLogic boxes are checked by themselves, the user is granted readaccess. When any of these are checked in conjunction with the Update Info box, they are granted read andwrite access. The user will not be granted write access to functions that are not checked, even if the UpdateInfo field is checked.Admin When this box is checked, the user will become an EnerVista URPlus Setup administrator, thereforereceiving all of the administrative rights. Exercise caution when granting administrator rights.
