GE Monogram 164D3333P095 Use And Care Manual

Also see for Monogram ZET737: Use and care guide

Contents

35PROBLEM POSSIBLE CAUSEOVEN WILL NOT • The oven temperature is too high to set a self-clean operation.SELF CLEAN Allow the oven to cool to room temperature and reset the controls.• Oven controls improperly set. See the Using the Self-Cleaning Ovensection.• The probe is plugged into the outlet in the oven. Remove the probefrom the oven.“CRACKING” OR • This is normal. It is the sound of the metal heating and cooling“POPPING” SOUND during both cooking and cleaning functions.EXCESSIVE SMOKING • Excessive soil. Press the CLEAR/OFF pad. Open the windows to ridthe room of smoke. Wait until the LOCKED DOOR light goes off.Wipe up the excess soil and reset the clean cycle.OVEN DOOR WILL • The oven is too hot. Allow the oven to cool below lockingNOT OPEN AFTER temperature.A CLEAN CYCLEOVEN NOT • Oven controls improperly set. See the Using the Self-Cleaning OvenCLEAN AFTER section.A CLEAN CYCLE • Oven was heavily soiled. Clean up heavy spillovers before starting theclean cycle. Heavily soiled ovens may need to self-clean again or for alonger period of time.“LOCK DOOR” • The self-clean cycle has been selected but the door is not closed.FLASHES IN Close the oven door.THE DISPLAYLOCKED DOOR • The oven door is locked because the temperature inside the oven hasLIGHT IS ON WHEN not dropped below the locking temperature. Press the CLEAR/OFFYOU WANT TO COOK pad. Allow the oven to cool.CONTROL SIGNALS • You forgot to enter a bake temperature or cleaning time. Press theAFTER ENTERING BAKE pad and desired temperature or the SELF CLEAN pad andCOOKING TIME OR desired clean time.DELAY START“F—AND A NUMBER • You have a function error code. Press the CLEAR/OFF pad. AllowOR LETTER” FLASH the oven to cool for one hour. Put the oven back into operation.IN THE DISPLAY • Disconnect all power to the oven for 30 seconds and then reconnectpower. If the function error code repeats, call for service.DISPLAY GOES • A fuse in your home may be blown or the circuit breaker tripped.BLANK Replace the fuse or reset the circuit breaker.• The clock is in the black-out mode. See the Oven Control, Clock andTimer section.DISPLAY FLASHES • Power failure. Reset the clock.