5-24 F35 Multiple Feeder Protection System GE Multilin5.2 PRODUCT SETUP 5 SETTINGS5Activity Value — 16 bit unsigned5.2.2 DISPLAY PROPERTIESPATH: SETTINGS PRODUCT SETUP DISPLAY PROPERTIESSome relay messaging characteristics can be modified to suit different situations using the display properties settings.• LANGUAGE: This setting selects the language used to display settings, actual values, and targets. The setting dis-plays when a language other than English was purchased, and the range depends on the order code of the relay.• FLASH MESSAGE TIME: Flash messages are status, warning, error, or information messages displayed for severalseconds in response to certain key presses during setting programming. These messages override any normal mes-sages. The duration of a flash message on the display can be changed to accommodate different reading rates.• DEFAULT MESSAGE TIMEOUT: If the keypad is inactive for a period of time, the relay automatically reverts to adefault message. The inactivity time is modified via this setting to ensure messages remain on the screen long enoughduring programming or reading of actual values.ENUMERATION DESCRIPTION1 Authentication Failed2 User Lockout3 FW Upgrade4 FW Lock5 Settings Lock6 Settings Change. Because this can fill the entire event log, it is supported by thealready existing Settings_Change.log file. This event is not required.7 Clear Oscillography command8 Clear Data Logger command (not applicable to all UR products)9 Clear Demand Records command (not applicable to all UR products)10 Clear Energy command (not applicable to all UR products)11 Clear Unauthorized Access command12 Clear Teleprotection Counters command (not applicable to all UR products)13 Clear All Relay Records command14 Role Log in15 Role Log off DISPLAY PROPERTIESLANGUAGE:EnglishRange: English; English, French; English, Russian;English, Chinese(range dependent on order code)MESSAGE FLASH MESSAGETIME: 1.0 sRange: 0.5 to 10.0 s in steps of 0.1MESSAGE DEFAULT MESSAGETIMEOUT: 300 sRange: 10 to 900 s in steps of 1MESSAGE DEFAULT MESSAGEINTENSITY: 25 %Range: 25%, 50%, 75%, 100%Visible when a VFD is installedMESSAGE SCREEN SAVERFEATURE: DisabledRange: Disabled, EnabledVisible when an LCD is installedMESSAGE SCREEN SAVER WAITTIME: 30 minRange: 1 to 65535 min. in steps of 1Visible when an LCD is installedMESSAGE CURRENT CUT-OFFLEVEL: 0.020 puRange: 0.002 to 0.020 pu in steps of 0.001MESSAGE VOLTAGE CUT-OFFLEVEL: 1.0 VRange: 0.1 to 1.0 V secondary in steps of 0.1
