2-22 F35 Multiple Feeder Protection System GE Multilin2.2 SPECIFICATIONS 2 PRODUCT DESCRIPTION22.2.8 COMMUNICATION PROTOCOLSRS232Front port: 19.2 kbps, Modbus RTURS4851 rear port: Up to 115 kbps, Modbus RTU, DNP 3Typical distance: 1200 mIsolation: 2 kV, isolated together at 36 VpkETHERNET (FIBER)ETHERNET (10/100 MB TWISTED PAIR)Modes: 10 MB, 10/100 MB (auto-detect)Connector: RJ45SIMPLE NETWORK TIME PROTOCOL (SNTP)clock synchronization error: <10 ms (typical)PRECISION TIME PROTOCOL (PTP)PTP IEEE Std 1588 2008 (version 2)Power Profile (PP) per IEEE Standard PC37.238TM2011Slave-only ordinary clockPeer delay measurement mechanismPARALLEL REDUNDANCY PROTOCOL (PRP)(IEC 62439-3 CLAUSE 4, 2012)Ethernet ports used: 2 and 3Networks supported: 10/100 MB EthernetOTHERTFTP, HTTP, IEC 60870-5-104, Ethernet Global Data (EGD)2.2.9 INTER-RELAY COMMUNICATIONSSHIELDED TWISTED-PAIR INTERFACE OPTIONSRS422 distance is based on transmitter power anddoes not take into consideration the clock sourceprovided by the user.LINK POWER BUDGETThese power budgets are calculated from the manu-facturer’s worst-case transmitter power and worstcase receiver sensitivity.The power budgets for the 1300 nm ELED are calcu-lated from the manufacturer's transmitter power andreceiver sensitivity at ambient temperature. Atextreme temperatures these values deviate basedon component tolerance. On average, the outputpower decreases as the temperature is increased bya factor 1dB / 5°C.MAXIMUM OPTICAL INPUT POWERPARAMETER FIBER TYPE100MB MULTI-MODEWavelength 1310 nmConnector LCTransmit power –20 dBmReceiver sensitivity –30 dBmPower budget 10 dBMaximum inputpower–14 dBmTypical distance 2 kmDuplex full/halfRedundancy yesINTERFACE TYPE TYPICAL DISTANCERS422 1200 mG.703 100 mEMITTER,FIBER TYPE TRANSMITPOWER RECEIVEDSENSITIVITY POWERBUDGET820 nm LED,Multimode –20 dBm –30 dBm 10 dB1300 nm LED,Multimode –21 dBm –30 dBm 9 dB1300 nm ELED,Singlemode –23 dBm –32 dBm 9 dB1300 nm Laser,Singlemode –1 dBm –30 dBm 29 dB1550 nm Laser,Singlemode+5 dBm –30 dBm 35 dBNOTENOTEEMITTER, FIBER TYPE MAX. OPTICALINPUT POWER820 nm LED, Multimode –7.6 dBm1300 nm LED, Multimode –11 dBm1300 nm ELED, Singlemode –14 dBm1300 nm Laser, Singlemode –14 dBm1550 nm Laser, Singlemode –14 dBmNOTE