5-58 F35 Multiple Feeder Protection System GE Multilin5.2 PRODUCT SETUP 5 SETTINGS5The settings menu for the fast EGD exchange is shown below:PATH: SETTINGS PRODUCT SETUP COMMUNICATIONS EGD PROTOCOL FAST PROD EXCH 1 CONFIGURATIONFast exchanges (50 to 1000 ms) are generally used in control schemes. The F35 has one fast exchange (exchange 1) andtwo slow exchanges (exchange 2 and 3).The settings menu for the slow EGD exchanges is shown below:PATH: SETTINGS PRODUCT SETUP COMMUNICATIONS EGD PROTOCOL SLOW PROD EXCH 1(2) CONFIGURATIONSlow EGD exchanges (500 to 1000 ms) are generally used for the transfer and display of data items. The settings for thefast and slow exchanges are described below:• EXCH 1 DESTINATION: This setting specifies the destination IP address of the produced EGD exchange. This is usu-ally unicast or broadcast.• EXCH 1 DATA RATE: This setting specifies the rate at which this EGD exchange is transmitted. If the setting is 50 ms,the exchange data will be updated and sent once every 50 ms. If the setting is 1000 ms, the exchange data will beupdated and sent once per second. EGD exchange 1 has a setting range of 50 to 1000 ms. Exchanges 2 and 3 have asetting range of 500 to 1000 ms. FAST PROD EXCH 1 CONFIGURATIONEXCH 1 FUNCTION:DisableRange: Disable, EnableMESSAGE EXCH 1 DESTINATION:0.0.0.0Range: standard IP addressMESSAGE EXCH 1 DATA RATE:1000 msRange: 50 to 1000 ms in steps of 1MESSAGE EXCH 1 DATA ITEM 1:0Range: 0 to 65535 in steps of 1(Modbus register address range)MESSAGE EXCH 1 DATA ITEM 2:0Range: 0 to 65535 in steps of 1(Modbus register address range)MESSAGE EXCH 1 DATA ITEM 3:0Range: 0 to 65535 in steps of 1(Modbus register address range)↓MESSAGE EXCH 1 DATA ITEM 20:0Range: 0 to 65535 in steps of 1(Modbus register address range) SLOW PROD EXCH 1 CONFIGURATIONEXCH 1 FUNCTION:DisableRange: Disable, EnableMESSAGE EXCH 1 DESTINATION:0.0.0.0Range: standard IP addressMESSAGE EXCH 1 DATA RATE:1000 msRange: 500 to 1000 ms in steps of 1MESSAGE EXCH 1 DATA ITEM 1:0Range: 0 to 65535 in steps of 1(Modbus register address range in decimal)MESSAGE EXCH 1 DATA ITEM 2:0Range: 0 to 65535 in steps of 1(Modbus register address range in decimal)MESSAGE EXCH 1 DATA ITEM 3:0Range: 0 to 65535 in steps of 1(Modbus register address range in decimal)↓MESSAGE EXCH 1 DATA ITEM 50:0Range: 0 to 65535 in steps of 1(Modbus register address range in decimal)
