Gaggenau BO 480 Use And Care Manual

Also see for BO 480: Instruction manual Instruction manual

Contents

Gaggenau BO 480 Use And Care Manual Manual pdf 15 page image

15The appliance enters the standby mode and the standbydisplay appears. The appliance is now ready foroperation.Heating up the ovenMake sure there are no packaging remainders left in theinterior.Heat up the empty, closed oven to dispel the 'new'smell. An hour with convection H at 390° F (200°C) isideal. For details of how to set this heating function,refer to the section entitled Operating the appliance.Cleaning accessoriesBefore using accessories for the first time, thoroughlyclean them with hot soapy water and a soft dish cloth.Activating the applianceStandbyThe appliance is in the standby mode when no functionis set or the child lock is activated.The control panel's brightness is reduced in the standbymode.Notes‒ There are various displays for the standby mode.The GAGGENAU logo and the time are set bydefault. Refer to the section entitled Factory settingif you would like to change the display.‒ The display's brightness depends on the verticalviewing angle. You can adjust the display by way ofthe "Brightness" setting in the factory settings.Activate applianceIn order to exit standby mode, you can either▯ Set the function selector,▯ Touch a control panel,▯ or open or close the door.Now you can set the desired function. Read theappropriate chapters to learn how to set functions.Notes‒ If "Standby screen = off" is selected in the factorysetting, you must turn the function selector to exitthe standby mode.‒ The standby display appears again if you have notmade any settings for a long while after activation.‒ The cooking compartment lighting goes out after alittle while if the door is open.