29Factory settingIn the general settings, you can adapt your applianceindividually.1 Set the program selector to S.2 Select "General setting" with the rotary selector.3 Touch the ™ symbol.4 Set the required general setting with the rotaryselector.5 Touch the % symbol.6 Set the general setting with the rotary selector.7 Save with ™ or cancel with ' and quit the currentgeneral setting.8 Turn the program selector to 0 to quit the generalsetting menu.Changes are saved.Basic setting Possible settings ExplanationBrightness Stages 1, 2, 3, 4, 5*, 6, 7, 8 Setting display brightnessStandby screen On*/Off- Clock- Clock + GAGGENAU logo*- Date- Date + GAGGENAU logo- Clock + date- Clock + date + GAGGENAU logoAppearance of the standby screen.Off: no display. Use this setting to reduce thestandby consumption of your appliance.On: several displays can be set, confirm "On"with ™ and choose the desired display with therotary selector.The selection is displayed.Display screen Minimized*/Standard When ‘Minimized’ is set, only the most importantdetails are displayed after a short time.Touchpad color Gray*/White Select the color of symbols on the touchpadsTouchpad tone Tone 1*/Tone 2/Off Select the signal tone when touching a touchpadTouchpad volume Levels 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the touchpad tonePreheating speed/sig-nalPreheating with signalQuick heat with signal*Preheating without signalQuick heat without signalThe audible signal sounds when the desired tem-perature is reached during preheating. Withquick heat, the desired temperature is reachedespecially fast.Signal volume Levels 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the signal toneTime format AM/PM / 24 h* Time display in 24 or 12-hour formatTime Current time Setting the timeDaylight savings Manual*/Automatic Automatic time changeover when changing day-light savings time. If automatic: setting of themonth, day and week when the time is to bechanged. To be set separately for summer andwinter time.