Gaggenau BO 480 Use And Care Manual

Also see for BO 480: Instruction manual Instruction manual

Contents

Gaggenau BO 480 Use And Care Manual Manual pdf 21 page image

21The suggested value of 24h at 185° F (85°C)appears in the display.To set Stage 2 cooking time with rotary selector:1 Touch the $ symbol to adjust the duration of Stage2 cooking time 6 .2 Set the desired Stage 2 cooking time with therotary selector.3 Touch the C symbol to adjust the end of Stage 2cooking time 5 .4 Select the end time with the rotary selector.5 Change the date if needed by touching the Csymbol to V .6 Rotate the selector to the desired date.7 Confirm settings by touching the ™ symbol.To set Stage 2 temperature:1 Rotate selector to desired Stage 2 temperature.2 Start with I .The temperatures of Stage 1 and Stage 2 appear in thedisplay. The remaining time to the beginning of Stage 2is counted down in the display. The Yom Tov screen willappear as shown.The program will begin with the pre-set warmtemperature without light, then advance to theprogrammed temperature with light until the end of theset date and time, and then maintain the pre-set warmtemperature for 60 minutes.The appliance no longer heats after expiry of the time.The display is blank. Set the program selector to 0.Switching off:To cancel the operation, set the program selector to 0.Personal recipesYou can save up to 50 individual recipes. You can recorda recipe. You can assign these recipes a name so thatyou can fall back on them quickly and conveniently if youneed them.Recording a recipeYou can set up to five phases in succession and you canrecord them.1 Set the program selection to the required heatingfunction.The i symbol is displayed.2 Touch the i symbol.3 Choose a free storage location with the rotaryselector.4 Touch the g symbol.5 Set the desired temperature with the rotaryselector.6 The cooking time is recorded.7 Recording another phase:Set the program selection to the required heatingfunction. Set the required temperature with therotary selector. A new phase begins.8 Once the appliance has achieved the desiredcooking result, touch the & symbol to end therecipe.9 Enter the name under "ABC" (see Section entitledEntering names).Notes‒ Recording a phase does not begin until theappliance has reached the set temperature.‒ Every phase must last at least one minute.‒ During the first minute you can change the heatingfunction or the temperature.Enter the core temperature for a phase:Insert the core temperature probe in the socket in theoven interior. Set the heating function and temperature.Touch the + symbol. With the rotary selector, enterthe required temperature and confirm it with +.6DEEDWKPRGH)) )Æ )