Gaggenau BS 451 Instruction Manual

Also see for BS 450: User manual and installation instructions Instruction manual Installation instructions

183 Set the desired cooking time using the rotaryselector.4 Press I to start.The appliance starts. The timer menu is closed. Thesettings for temperature, heating mode, elapsing timeand cooking time end are shown in the display.During the last minute of the cooking time the remainingtime is displayed in an enlarged format.The appliance switches off after the cooking time haselapsed. The 6 symbol flashes and a signal sounds.The signal stops when you touch the ™ symbol, openthe appliance door, or switch the function selector to 0.Changing the cooking time:Call up the timer menu. Use C to select the 6"Cooking time" function. Change the cooking time usingthe rotary selector. Press I to start.Clearing the cooking time:Call up the timer menu. Use C to select the 6 "Cookingtime" function. Clear the cooking time with Ž. Return tonormal operation with '.Cancelling the entire operation:Set the function selector to 0.Note: You can also change the heating mode andtemperature during the cooking time.End of cooking timeYou can delay the cooking time end to a later time.Example: it is 14:00. The dish requires a cooking time of40 minutes. You want it to be ready at 15:30.Enter the cooking time and delay the cooking time enduntil 15:30. The electronics system calculates the starttime. The appliance starts automatically at 14:50 andswitches off at 15:30.Bear in mind that food which spoils easily should not beleft in the cooking compartment for too long.Delaying the cooking time endYou have set the heating mode, temperature andcooking time.1 Touch the M symbol.2 Use C to select the 5 "Cooking time end"function.3 Set the desired cooking time end using the rotaryselector.4 Press I to start.The appliance switches to standby. The heating mode,temperature, cooking time and cooking time end appearin the display. The appliance starts at the calculatedtime and switches off automatically when the cookingtime has elapsed.Note: If the 6 symbol flashes: You have not set thecooking time. Always set the cooking time first.Once the cooking time has elapsed, the applianceswitches off. The 5 symbol flashes and an audiblesignal sounds. The signal stops early if you touch the ™symbol, open the appliance door, or set the functionselector to 0.&RRNLQJWLPH&RRNLQJWLPHHQG