Gaggenau BS 451 Instruction Manual

Also see for BS 450: User manual and installation instructions Instruction manual Installation instructions

8Colours and displayColoursThe different colours are used to guide the user in therelevant setting situations.AppearanceDepending on the situation, the appearance of symbols,values or the entire display changes.Additional information ( and )By touching the ( symbol, you can call up additionalinformation. For example, information on the heatingfunction set or on the current temperature of thecooking compartment.Note: During continuous operation, small fluctuations intemperature are normal after the oven has heated up.The ) symbol is displayed for important informationand action prompts.Important information on safety andoperation mode are occasionally shown automatically.These messages either disappear automatically after afew seconds or must be confirmed with ™.Cooling fanYour appliance has a cooling fan. The cooling fanswitches on during operation. Depending on theappliance version, the hot air escapes above or underthe door.After removing cooked food, keep the door closed untilthe appliance cools down. The appliance door must notbe left ajar, as adjoining kitchen furniture may bedamaged. The cooling fan continues to run for a certaintime after operation and then switches off automatically.Caution!Do not cover the ventilation slots. Otherwise, theappliance will overheat.Orange Initial settingsMain functionsBlue Basic settingsCleaningWhite Values which can be setZoom The setting that you are changing willappear larger on the display.If you have set a time and it is about torun out, it will appear larger on the dis-play just before it runs out (e.g. 60 sec-onds before the end, if you have set thetimer).Pared-downdisplayAfter a short while, the amount of infor-mation shown on the display will bereduced and only the most importantinformation will remain.This function ispre-set and can be changed in the basicsettings.