20Individual recipesIt is possible to save up to 50 individual recipes. Youcan record a recipe. These recipes can be given a nameso that they can be called up quickly and convenientlywhen required.Recording a recipeIt is possible to consecutively set up to 5 phases and torecord at the same time.1 Select the required heating mode using thefunction selector.The i symbol is displayed.2 Touch the i symbol.3 Select a free memory location by turning the rotaryselector.4 Touch the g symbol.5 Select the required temperature using the rotaryselector.6 The cooking time is recorded.7 To record another phase:Select the required heating mode using thefunction selector. Set the temperature using therotary selector. This begins a new phase.8 If the dish has achieved the desired cooking result,touch the & symbol to finish the recipe.9 Enter the name in "ABC" (refer to the Entering namessection).Notes‒ Recording of a phase starts only once the selectedtemperature has been reached.‒ The minimum duration of each phase is 1 minute.‒ During the first minute of a new phase it is possibleto change the heating mode or the temperature.Set a core temperature for a phase:Connect the core temperature probe to the socket in theoven. Set the heating mode and the temperature. Touchthe + symbol. Select the core temperature using therotary selector and touch + to confirm.Programming a recipeYou can programme and save up to 5 preparationphases.1 Turn the function selector to the desired type ofheating. Turn the rotary selector to set the desiredtemperature.The i symbol is displayed.2 Touch the i symbol.3 Select a free memory location by turning the rotaryselector.4 Touch the % symbol.5 Enter the name in "ABC" (see the Entering nameschapter).6 Use the C symbol to select the first phase.The type of heating and temperature at thebeginning is displayed. You can change the type ofheating and the temperature by using the rotaryselectors.7 Use the C symbol to select the time setting.8 Turn the rotary selector to set the desired cookingtime.9 Use the C symbol to select the next phase.- or -Preparation is complete, finish making entries.10 Save with ™.- or -Cancel with ' and exit the menu.Entering the core temperature for a phase:Use the C symbol to select the next phase. Setting thetype of heating and temperature. Touch the + symbol.Using the rotary selector, enter the desired coretemperature and confirm with +.Note: No cooking time can be entered for phases withprogrammed core temperatures.