Gaggenau BS 471 Use And Care Manual

Also see for BS 470: Installation instructions Instruction manual Instruction manual Instruction manual

Contents

Gaggenau BS 471 Use And Care Manual Manual pdf 25 page image

25Yom Tov modeWith this function, the appliance is programmed toperform in three stages.Stage 1 and 2 can be programmed for a maximum totalduration of 74 hours. The duration of Step 3 is 1 hourand cannot be modified.Stage 1: maintains a warm temperature of 122° F(50°C) in the convection heating function. The interioroven lights remain off through this stage.Stage 2: the appliance raises to a desired temperaturesetting and maintains a temperature between 120 and450° F (50 -230°C). For warming and cooking foods inthe convection heating function. The desired time canbe adjusted for this stage. The interior oven lights willbe on during this time.Stage 3: maintains a warm temperature of 122° F(50°C) in the convection heating function for 1 hourafter stage 2 has ended. The interior oven lights will beon during this time.Note that easily perishable foodstuffs must not be left inthe oven for too long.Setting the Yom Tov mode1 Set the program selector to ž .2 Touch the / symbol.The suggested value of 24h at 185° F (85°C)appears in the display.To set Stage 2 cooking time with rotary selector:1 Touch the $ symbol to adjust the duration of Stage2 cooking time 6 .2 Set the desired Stage 2 cooking time with therotary selector.3 Touch the C symbol to adjust the end of Stage 2cooking time 5 .4 Select the end time with the rotary selector.5 Change the date if needed by touching the Csymbol to V .6 Rotate the selector to the desired date.7 Confirm settings by touching the ™ symbol.To set Stage 2 temperature:1 Rotate selector to desired Stage 2 temperature.2 Start with I .The temperatures of Stage 1 and Stage 2 appear in thedisplay. The remaining time to the beginning of Stage 2is counted down in the display. The Yom Tov screen willappear as shown.The program will begin with the pre-set warmtemperature without light, then advance to theprogrammed temperature with light until the end of theset date and time, and then maintain the pre-set warmtemperature for 60 minutes.The appliance no longer heats after expiry of the time.The display is blank. Set the program selector to 0.Switching off:To cancel the operation, set the program selector to 0.6DEEDWKPRGH)) )Æ