Compass Page OptionsSight ‘N Go—Use the Sight ‘N Go feature to locate alandmark visually and then lock in a magnetic headingto it. Rino 530 feature only.Stop Navigation/Resume Navigation—Cancels/resumesnavigation (“Grayed out” or disabled unless you arenavigating on a Go To, Track, or Route.)Recalculate—Recalculates the active route.Bearing Pointer/Course Pointer—Toggles betweenBearing (always directed toward your destination) andCourse (shows amount of correction needed to get backon course.)Show Data Fields—Toggles to display data fields on theright side of the display or removing the data fieldsCalibrate Compass—Calibrates the electronic compass.Follow the on-screen instructions. Rino 530 feature only.Restore Defaults—Returns options and data field choicesto factory designations.To change data fields:1. Use the Thumb Stick to highlight the desired datafield and then press it In to display the list of dataoptions.2. Select the desired option from the list and pressthe Thumb Stick In. The list of data field choicesand definitions may be found in the Appendix.34 Rino ® 520/530 Owner’s ManualU NIT OPERATION > C OMPASS PAGECompass Page Option Menu
