84 Rino ® 520/530 Owner’s ManualU NIT OPERATION > SETUP PAGESAltimeter SetupThe Altimeter Setup Page allowsyou to set the Altimeter to self-calibrate each time you turn on theRino unit in order to function as abarometer or to manually calibratewhen you have accurate elevationor pressure data.To setup the Altimeter:1. Cycle the Page/Quit button or press the MainPage button to access the Main Menu.2. In the Main Menu, scroll down and select Setup.3. Select the Altimeter icon to open the AltimeterSetup page.4. Highlight the Auto Calibration field and press theThumb Stick In to select from On or Off. WhenOn, elevation is corrected by GPS.5. Highlight the Barometer Mode field and pressthe Thumb Stick In to select “Variable Elevation”(used when you are moving) or “Fixed Elevation”(Used when stationary.)6. To manually calibrate the Altimeter, refer todetailed instructions on page 41.Welcome Page SetupThe Welcome Page setup allows youto insert a message such as ownershipinformation on the Welcome Page (thefirst page to display when you turn theunit on.)To setup the Welcome Page:1. Press the Page/Quit button or the Main Pagebutton to access the Main Menu.2. Highlight the Setup icon from the Main Menu andpress the Thumb Stick In to display the SetupMenu.3. Select Welcome Message and press the ThumbStick In to display the setup page.4. Use the on-screen keyboard to begin enteringyour message in the Welcome Message field.5. Highlight OK and the press the Thumb Stick In tofinish.Altimeter Setup PageWelcome Page
