Garmin 80 Pilot's Manual
Also see for Fishfinder 80: User NewsletterUser NewsletterSupplemental Flight manualData listQuick reference guide
                                                  | |
Contents
| 
Apollo CNX80 Pilot’s Guide111. Press Direct-To.2. Select a waypoint for the holding pattern.a. Press WPTS (default) to select a waypoint along your flight planby turning the Large knob to highlight the waypoint. Press Hold.orb. Press DB to select a waypoint from the database with the Largeand Small knobs. Press Hold.3. Use the Large and Small knobs to select Right or Left turns, holdcourse, and hold length (nm or km) or hold time (minutes).4. Press Menu/Enter. The Hold pattern will be drawn on the displayand the CNX80 will provide guidance for the holding pattern. whenyou near the holding pattern flight plan sequencing is suspended.Press SUSP (SUSP annunciator will turn off) to exit the holding pat-tern and return to the flight plan.Destination (Dest)The Dest Menu selection key replaces the active flight plan with adirect course to the displayed waypoint. You can choose a waypointfrom your flight plan (WPTS) or another waypoint from the database(DB).1. When you press Direct-To, the default waypoint shown will be thehighlighted waypoint in your flight plan when the WPTS smart key ishighlighted. You can turn the Large knob to select a different a dif-ferent waypoint in your flight plan.2. You may select a waypoint that is not in your flight plan by pressingthe DB smart key and then use the Large and Small knobs to selectthe new waypoint.3. Press the Dest key to navigate directly to the selected waypoint.4. Press Menu/Enter to accept the new destination waypoint. PressMenu/Enter again to activate it.Direct-To |
Related manuals for Garmin Fishfinder 80
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine