Garmin 80 Pilot's Manual
Also see for Fishfinder 80: User NewsletterUser NewsletterSupplemental Flight manualData listQuick reference guide
                                                  | |
Contents
| 
Apollo CNX80 Pilot’s Guide28resolving any conflicts by turning the Large knob to highlight it andthen pressing the CLR key. Deleting a discontinuity results in a fix-to-fixdirect nav path between those waypoints.Pilot Nav LegsWhen the “Pilot Nav” message appears on a leg in your flight plan itmeans the CNX80 will not provide guidance on that leg. You will haveto use other flight instruments or autopilot modes to fly the given pro-cedure leg until intercepting the course to the next waypoint. Oncethe intercept is complete the flight plan will sequence and begin pro-viding guidance to the waypoint.The CNX80 will go into Suspend mode when the current leg is a PilotNav leg. Pressing SUSP again sequences you to the next leg in the pro-cedure. As you arrive at the course the course deviation indicator willbegin to center and once again you may engage the appropriate NAVmode on your autopilot or flight director.Searching for Waypoints to Insert into a Flight PlanThe following steps describe in general how you can select a waypointfor one of the points in a flight plan.1. Press the FN key (if necessary) and then the FPL key.2. Press the NEW key. The waypoint database will be displayed. Youcan choose to search for a waypoint by the Identifier, Facility Name,Location, or Waypoint Type.3. Select by Identifiera. With the first character of the Identifier highlighted, turn theSmall knob to select the desired character.b. Turn the Large knob CW to the next character and select thecharacter by turning the Small knob.4. Select by Waypoint Typea. With the first character of the Identifier highlighted, press theCRSR knob in. The whole Identifier field will be highlighted. Nowturn the Large knob CCW one turn to highlight the waypoint typefield.b. Turn the Small knob to display the different waypoint types.5. Select by Facility Namea. With the first character of the Identifier highlighted, press theCRSR knob in. The whole Identifier field will be highlighted. Nowturn the Large knob CCW one turn to highlight the Facility Namefield.b. Turn the Small knob to display the facilities in alphabeticsequence.Flightplan |
Related manuals for Garmin Fishfinder 80
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine