Garmin 80 Pilot's Manual
Also see for Fishfinder 80: User NewsletterUser NewsletterSupplemental Flight manualData listQuick reference guide
                                                  | |
Contents
| 
Apollo CNX80 Pilot’s Guide25VFRPress the VFR key to select the VOR 1200 squawk code.TrgrSpdThe TrgrSpd key allows you to edit the aircraft speed that willswitch the transponder automatically between active and standby.See the Auto mode description below.AutoWhen Auto mode is selected, the transponder will automaticallybecome active after the aircraft reaches the Trigger speed. Whilethe aircraft is below the Trigger speed, your transponder will notsend any information.1. In Transponder mode, press Menu/Enter.2. If necessary, edit the Trigger Speed. Press TrgrSpd. Select thedesired Trigger Speed with the Large and Small knobs. PressMenu/Enter.3. Press Menu/Enter. Press the Auto key. Auto mode is active whenit is highlighted. Press Auto again when you want to deactivatethe Auto mode.Manually Select a Squawk Code1. Press the CRSR in or turn the Large knob to activate squawk codeediting. Numbers 0 - 7 will be displayed adjacent to the Smart andLine Selection keys.2. Press the key for the desired number. After pressing a numberedkey, the next number to the right will be active for editing.OR1. Change the number value with the Small knob and move to the nextnumber with the Large knob.2. After selecting the fourth number, turning the Large knob or press-ing Menu/Enter key will end editing.3. You can press the CRSR knob while editing to cancel any changes.XPDR |
Related manuals for Garmin Fishfinder 80
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine