Garmin 80 Pilot's Manual
Also see for Fishfinder 80: User NewsletterUser NewsletterSupplemental Flight manualData listQuick reference guide
                                                  | |
Contents
| 
Apollo CNX80 Pilot’s Guide414. Press the Menu/Enter key or the CRSR knob when you are finishedmaking selections.5. Press the Activate or Standby key to activate or deactivate the Paral-lel Track values selected.Simulator ModeThe CNX80 has a built-in simulator so you can practice with your unitwithout being in flight. You can set your present position, groundspeed, and track. The track can also be set to Auto to simulate usewith an autopilot. The Com and Nav radios, and transponder willappear to operate normally, but will not send any signals.1. After the CNX80 start-up screen (clouds and title) ends and the leftside of the display information just appears, press SUSP threetimes.2. Press Menu/Enter to continue in Simulator mode or press CLR tocontinue with normal operation.3. Turn the Small knob, if desired, to change the Local Altimeter Set-ting. Press Menu/Enter to continue to the start-up test phase. PressSKIP to bypass the start-up tests.4. Select Automatic Track mode, present position, and airspeed asdescribed below.Automatic Track (ATK)Press the ATK key to enable/disable the Automatic Track mode. Whenenabled, the simulator ownship will follow the tracking of the flightplan. Press CLR to exit and enable Automatic Track. Press ATK andCLR again to disable Automatic Track.Simulator |
Related manuals for Garmin Fishfinder 80
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine