Garmin 80 Pilot's Manual
Also see for Fishfinder 80: User NewsletterUser NewsletterSupplemental Flight manualData listQuick reference guide
                                                  | |
Contents
| 
Apollo CNX80 Pilot’s Guide30Steps for Setting Up an IFR Flight PlanProcedures can be inserted at the time you are creating the flight plan(as described here) or later with the Procedure (PROC) function.NoteIf datum for an airport is unknown, no terminal or instrumentprocedures will be displayed. The Jeppesen database canonly show one procedure type per runway (i.e. ILS, GPS,VOR). The procedures are present, but must be selectedfrom multiple transitions. Note that the name may not matchthe paper approach. Verify the sequence of waypoints toensure you have selected the desired procedure.A. Set Origin, Destination, and Alternate Waypoints.B. Add Departure Procedure (DP).C. Insert en route flight plan of Airways and/or Waypoints.D. Modifying a Flight Plan While in FlightE. Add Arrival Procedures (STARS).F. Add Approach Procedures when you receive clearance.A. Set Origin, Destination, and Alternate Waypoints1. In Flightplan mode, press the NEW key.2. Use the Large and Small knobs to select the Origin waypoint. PressMenu/Enter.3. The Destination waypoint selection page will now be displayed.Select the Destination waypoint and press Menu/Enter.4. Set an Alternate airport, if desired. Turn the Large knob CCW tohighlight the flight plan name. Press the Altrnt key and select analternate airport/waypoint along the flight plan with the Large andSmall knobs. The alternate airport will be added in parentheses tothe flight plan name.5. Press SAVE.Flightplan |
Related manuals for Garmin Fishfinder 80
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine