Garmin 80 Pilot's Manual
Also see for Fishfinder 80: User NewsletterUser NewsletterSupplemental Flight manualData listQuick reference guide
                                                  | |
Contents
| 
Apollo CNX80 Pilot’s Guide164. Press <-SBY to insert the highlighted frequency into the Standbyposition or <-A-> to insert the frequency into the Active position.Info on Nearest Waypoint1. Press NRST.2. Press the key for the waypoint type you want to search.3. Turn the Large knob to select the nearest waypoint.4. Press the INFO button.Fly Direct-To a Nearest Waypoint1. Press NRST.2. Press the key for the waypoint type you want to search.3. Turn the Large knob to scroll thru the list of nearest waypoints. High-light the desired waypoint.4. Press the Direct-To button.5. Press the Direct key.Change Your Approach to a Nearest Waypoint1. Press NRST.2. Turn the Large knob to select the desired nearest waypoint.3. Press the INFO button. Note, if “IFR” is listed with the identifier,instrument approaches are available. Press INFO again to toggleback to the Nearest Waypoint list.4. With the desired airport selected, press the D-> key.5. Press the Dest key. Press Menu/Enter to accept the change to yourflight plan. Press Menu/Enter to activate the new flight plan directto the selected waypoint.6. Press FN and then PROC.7. Press Appch for the destination waypoint. Select the approach withthe Large and Small knobs. You can also select the type ofapproach with the selection keys on the right side of the display.Press Menu/Enter.7. Press EXEC. The CNX80 will ask if you want to replace the Activeflight plan with the Modified flight plan. Press Menu/Enter.Nearest |
Related manuals for Garmin Fishfinder 80
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine