Garmin 80 Pilot's Manual
Also see for Fishfinder 80: User NewsletterUser NewsletterSupplemental Flight manualData listQuick reference guide
                                                  | |
Contents
| 
Apollo CNX80 Pilot’s Guide12Course To (CrsTo)Course To operation allows you to select an inbound to the interceptcourse for the selected waypoint. The default course for the operationis the course from the present position to the selected waypoint. Thelength of the magenta course to line will be the distance from thepresent position to the selected waypoint or 20 NM; whichever islarger to a maximum of 300 NM. Upon reaching the selected waypoint,if the waypoint is in the active flight plan, the flightplan will sequenceto the next waypoint in the flightplan normally. Maps are always drawnwith True North at the top of the display (Up).1. Press Direct-To. Select a new waypoint, if desired, with the Largeand Small knobs.2. Press CrsTo. A map is displayed showing the selected course.3. Change the course bearing, if desired. Turn the Large knob tochange the 10’s value. Turn the Small knob to change the 1’s value.4. Press Menu/Enter.Course From (CrsFr)The Course From operation allows you to navigate from a waypoint ona pre-defined course. The default course for the Course From opera-tion will depend on whether the ownship symbol is heading toward theselected waypoint or away from it. If the ownship symbol is headingtoward the selected waypoint, the default course will be the bearingfrom the present position to the selected waypoint. If the ownship sym-bol is heading away from the waypoint, the default course will be thebearing from your present position to the selected waypoint plus180°. The length of the magenta course line will always be 100 NM.Direct-To |
Related manuals for Garmin Fishfinder 80
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine