103Basic OperationTimers (TMR)The Timer Mode allows you to set or view several timing functions. You can set one or two timers as countup or count down timers. You can view the Trip Time, Trip Distance, Flight Time, and Flight Distance. TheTrip Time and Trip Distance show the time and distance traveled since being reset. The Flight Time and FlightDistance show the time and distance traveled since the Trigger Speed was reached. Enter the Trigger Speed toset the threshold where the Flight timers start after the aircraft reaches the selected speed. Use the Large knobto highlight the selection to change.Timer 1 and Timer 2Edit the Timer values by pressing in the CRSR knob, move the cursor with the Large knob, change the valuewith the Small knob, and then press the Enter key. Press the 1 Min or 2 Min keys to instantly insert one ortwo minutes as the time. Press the Disp key to display the Timer value on the Map pages. The Disp key willbe highlighted and an asterisk will appear next to the value that will be displayed on the Map pages. Press theCLR key to reset the values to 0.Trip Time and DistanceThe Trip Time and Distance counters display the time and distance traveled since the last time they werereset.1. Turn the Large knob to highlight Trip Time.2. Press the Disp key to display the Trip Timer value on the Map pages.3. To clear the Trip Time and Trip Distance values, press the CLR key.TimersTimer Selections
