58Basic OperationEditPressing the Edit menu item key, while highlighting the Active flight plan, creates a copy of the active flightplan, which is called the “Modified” flight plan. Making a copy protects you from accidently changing your ac-tive flight plan. You can now edit the “Modified” flight plan. If you are already viewing a “Modified” flight plan,you will be prompted to replace the current modified flight plan (Menu/Enter) or keep the current one (CLR).1. Turn the Large knob to move to the leg to modify (highlighted in green).2. Press Modify to change the selected leg or procedure. Use the Large and Small knobs to select a newwaypoint and press Menu/Enter.3. Press the →Wpt key to insert another Waypoint or press the Arwy key to insert an Airway.4. After modifying the flight plan, the smart keys give you the choice of Back, Executing, or Expanding andviewing details in the new Flight PlanExecute (Exec)Use the Execute command to make the highlighted flight plan the Active flight plan. A flight plan that is beingmodified will not be used until you press Exec and confirm the activation.Comment (Cmnt)This function allows you to place a comment, of up to one line of text, for the flight plan. The comment will beplaced just below the flight plan name.CopyThe Copy function creates a duplicate of the selected flight plan. You can use the Copy function as a timesav-ing method to create a new flight plan when you will reuse many of the same waypoints and procedures.Select an Origin Waypoint for Flight PlanRemoving a discontinuity from a Flight PlanFlight Planning
