33Basic OperationPanning (PAN)The Panning feature of the Map mode allows you to check out the area near your present position. You canactivate the Panning feature by pressing the PAN key or by pressing the CRSR button on the Small knobwhen in Map mode.The crosshair cursor (+) starts at your present position when you start the Pan function. The crosshair cursorremains in the center of the map display. Move the map around the crosshair by turning the Large (pans leftand right of pan track) and Small (pans forward and back of pan track) knobs. A green line will be drawnbetween your present position and the crosshair cursor position. The range and bearing to the crosshair cursorposition from your present position and the Lat/Lon of the crosshair position is shown at the bottom of themap display.RangePress the Range key to highlight the Range menu item. When Range is selected, turning the Small knob willchange the map range to zoom in or out at the crosshair position.Create a New User waypointUser waypoints allow you to create unique waypoints not already present in the database.1. While in the Pan function, press MRK.2. Press Menu/Enter to save the displayed user name.or3. Create a name of your choice and add other information as desired using the Small knob to changecharacters and the Large knob to move the cursor. Press CLR to delete a highlighted character. Then,press Menu/Enter to save the information.Map Mode Panning FunctionPress MRK to create a User waypoint with thePanning functionPanning
